| Project by Masterchief | posted 1622 days ago | 999 views | 3 times favorited | 3 comments |  |
 |
As before in the last post, here is the mirror I made with the left over scrap wood from the table. She wanted a little Asian flare to this and I tried my best. The fame is white oak and walnut. The panel is Mappa Burl. All the joints used were half lapped and pinned. I guess you can say I took the design from a pair of chopsticks. Again not a show piece but it is hanging in the bedroom so many people will not have to see it.
-- When you are at a point in life and you think there is nothing more to learn, then you must understand that you have learned nothing at all. Billy
| Pin It |
3 comments so far
SWO
home | projects | blog
13 posts in 2011 days
#1 posted 1622 days ago
Great idea. My wife is asian so if she sees this she may want one herself. Did you finish this with anything? I like the square pins. I have to think about that one for a bit to figure out how you did that. Very nice.
-- No matter how many times I cut this wood it keeps coming up short.
Woodhacker
home | projects | blog
1138 posts in 1893 days
#2 posted 1621 days ago
Very nice. Great use of scraps too!
-- Martin, Kansas
mtnwild
home | projects | blog
3474 posts in 1697 days
#3 posted 1621 days ago
I like it. Looks like you could use it horizontal or vertical. Has great eye catching features, nice original design.
-- mtnwild (Jack), It's not what you see, it's how you see it.
Have your say...