LumberJocks

Wood rings

  • Advertise with us
Project by Scott Landry posted 01-12-2015 09:43 AM 1995 views 9 times favorited 10 comments Add to Favorites Watch

Here is what you can do when you mount your trim router the underside of your drill press. These rings have bentwood on the inside to make them strong. All are finished with CA glue. I am making them for my girls for Valentine’s Day. Many possiblities with this setup. Here is a video of how I did it. http://youtu.be/zjKx_g27PHk

-- Every project is an opportunity to acquire new tools and any solution that requires buying a new tool is the correct one.





10 comments so far

View Knappen's profile

Knappen

60 posts in 1721 days


#1 posted 01-12-2015 11:13 AM

I love the rings.
Can you give a describtion on how you did it?
I may have to “steal the idea”.

-- Knappen aka Ole - I have to try everything at least once. http://oknap.dk/pg

View Scott Landry's profile

Scott Landry

177 posts in 1286 days


#2 posted 01-12-2015 11:47 AM

Thanks, It is a multi step process. You make the bentwood inner part first then make the outer part out of sandwiched wood wafers glued with epoxy. I use a hole saw to drill a plug out of the wafer and glue a dowel into the center hole of the plug. Then chuck that up in the drill press and hollow it out with the router to the same size and the bentwood center. Glue them together and then mill it. I cant describe it very well obviously. Once I post a video I will update the project posting with a link and that will explain it all. I basically played around and stubled on the fusion process. I should be done with the video in a day or so. you can subscribe to me on youtube. I am Selandry1

-- Every project is an opportunity to acquire new tools and any solution that requires buying a new tool is the correct one.

View majuvla's profile

majuvla

11042 posts in 2683 days


#3 posted 01-12-2015 01:01 PM

They are very beautiful.

-- Ivan, Croatia, Wooddicted

View hoss12992's profile

hoss12992

3958 posts in 1709 days


#4 posted 01-12-2015 03:33 PM

Those are really cool. Great job

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View joegard's profile

joegard

16 posts in 1562 days


#5 posted 01-12-2015 06:17 PM

Very nice. I’ve made a couple of rings for my daughters out of some scraps, but without the bent lamination inner core they are way to fragile. I really look forward to your video showing how you make these.

View Diggerjacks's profile

Diggerjacks

2208 posts in 2954 days


#6 posted 01-12-2015 06:38 PM

Hello Scott
I live your rings

I am waiting for watching your vidéo

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View JonBikeRacer's profile

JonBikeRacer

69 posts in 1418 days


#7 posted 01-12-2015 11:36 PM

These are seriously nice! I think I know what you are doing with the router. Have you considered maybe using a flush trim bit with an oversized ball bearing to eliminate any guesswork on the thickness of the ring?

-- Jon "That's about as close as I can eyeball it"

View Knappen's profile

Knappen

60 posts in 1721 days


#8 posted 01-13-2015 05:14 AM

Thanks for the describtion. I’m looking forward to the video.

-- Knappen aka Ole - I have to try everything at least once. http://oknap.dk/pg

View Scott Landry's profile

Scott Landry

177 posts in 1286 days


#9 posted 01-13-2015 06:32 AM

That’s a great idea. I try to make them 3/32 thick. Now I need a 7/32 bearing. I already have the 1/4 spiral flush trim bit that barely gets any use.

-- Every project is an opportunity to acquire new tools and any solution that requires buying a new tool is the correct one.

View burntwood's profile

burntwood

17 posts in 2225 days


#10 posted 01-14-2015 12:08 AM

Very nice!

-- ..."When everyone is thinking the same... Someone isnt thinking." ... George S Patton

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com