or Join Now!
My wife said I could make two as easy as I could make one.
-- R K SP8 "The 10 Commandments are NOT multiple choices"
home | projects | blog
16 posts in 2805 days
Preview this project card
10949 posts in 3000 days
#1 posted 11-25-2008 04:06 PM
Did you turn allthose spindles?
-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.
16199 posts in 3463 days
#2 posted 11-25-2008 04:11 PM
Was your wife trying to tell you something? :-)
-- Charlie M. "Woodworking - patience = firewood"
#3 posted 11-25-2008 04:12 PM
I have to admit that I did buy the small spindles but I did turn the end post. All is glued with biscuits and dowels. There is no metal at all except the brass knob on the stop pin.
75 posts in 2840 days
#4 posted 11-25-2008 04:17 PM
78 posts in 3153 days
#5 posted 11-25-2008 04:28 PM
These are really nice cradles. It doesn’t matter that some of the spindles were ‘bought’. The craftsman had to put them together into something useful and beautiful. They’re the inspiration I needed to start the one I’m building (Friday after Thanksgiving). I like the fact there are no screws or other fasteners. Well done!
Are you sure your wife was talking about the cradles (“make two as easy as one”)?
-- The name is "Splinter"... I'm the son-of-a-son-of-a-carpenter
#6 posted 11-25-2008 06:29 PM
The two for one was inspired by the fact that my son had a boy and two months later my daughter had a boy also.
371 posts in 2719 days
#7 posted 11-25-2008 11:28 PM
Can you give me a little Tech Specs Please?
What kind of Wood was used?
What kind of Finish was used?
How many Coats of finish:
It’s really nice, I like them a lot.
-- Jimmy "Handi" Warner, http://www.facebook.com/HandisWorkshop, http://www.facebook.com/HandisCreations, Twitter: @Handisworkshop, @HandisCreations
#8 posted 11-26-2008 01:50 PM
All white oak, 4 coats of poly, lite 220 grit sanding on the first 2 coats and 0000 steel wool after 3rd coat.
Thanks for the positive comments.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics