| Project by Thos. Angle | posted 352 days ago | 530 views | 1 time favorited | 17 comments | ![]() |
![]() |
This is a prototype. I have been wanting to venture into the world of chair makers for some time. This is where I started. I was mainly seeing how I could do the compound angle used to attach legs to the seat of this type of sitting contraption. I had a couple trashy stools that I have used in the shop for about 20 years. they are K-Mart crap but have worked and are the right height. I used them to loosely pattern this stool. Carleen has been after me to build more “Rustic” furniture. Well, this is about as rustic as it gets. Don’t look too close. We aren’t even going to get into all the mistakes on this one. The legs are leftover pine from my work bench. The top is a piece of 1 1/2 inch Alder and the rails are left over Oak from the fireplace.I drilled the top at a 10 degree compound angle and turned the ends of the legs on the lathe. I drove them through the top and then split them with a chisel and wedged them. I made the legs hexagon on the router table and the roughed them up. Don’t ask how the rails are attached, it ain’t purty. Like I said this was to learn on and I sure did!! I put 3/4 inch of high density foam on the top and sewed the carving leather to some chap leather. I carved the top and then stretched the chap leather down over the foam and the top. I then applied the band and tacked it down. This was to learn on before I begin on the 4 Oak stools that I am going to build next. Well, right after I do Carleen a foot stool. I got the idea for the top from the clock I just did. It works well for what it is intended to do.
-- Thos. Angle































17 comments so far
Bob #2
home | projects | blog
2987 posts in 899 days
posted 352 days ago
Your leather work is exceptional Thomas.
Bob
-- A mind, like a home, is furnished by its owner
CedarFreakCarl
home | projects | blog
562 posts in 931 days
posted 352 days ago
Almost too purty to sit on! Thanks for posting.
-- Carl Rast, Pelion, SC
Douglas Bordner
home | projects | blog
3415 posts in 942 days
posted 352 days ago
Looks okay to me, but you could put that seat top on top of a stump and it would elevate it to artwork IMHO.
Thanks for the post, Thos.
-- "Bordnerizing" perfectly good lumber for over a decade.
Praki
home | projects | blog
139 posts in 875 days
posted 352 days ago
I like the leather top. And, the stool ain’t bad either :)
Wouldn’t mind hearing more about ‘carving leather’.
-- Praki, Aspiring Woodworker
WoodMosaics
home | projects | blog
99 posts in 410 days
posted 352 days ago
It makes a nice looking stool.
-- It’s not so much what we know that causes the trouble, it’s what we know that’s not so.
mtnwild
home | projects | blog
1979 posts in 405 days
posted 352 days ago
Beautiful. Nice to see such fine leather craft. Very special.
-- mtnwild (Jack), It's not what you see, it's how you see it.
Les Hastings
home | projects | blog
948 posts in 651 days
posted 352 days ago
That’s a dandy, once again very nice leather work Thomas!
-- Les, Wichita, Ks. (I'd rather be covered in saw dust!)
miles125
home | projects | blog
1413 posts in 883 days
posted 352 days ago
Looks like a stool Marty Robbins might have set on. You go dude!
-- miles125, Alabama.."Architecture is frozen music""
DAN
home | projects | blog
6396 posts in 861 days
posted 352 days ago
I like it ! glad to see you pack at it again.
-- work from your heart and your spirit will live forever
Karson
home | projects | blog
25271 posts in 1278 days
posted 352 days ago
Thomas. A great addition to the woodworking skills. It’s always nice to learn something new ever so often. I’ve not tckled chairs or stools yet.
But I plan on it someday.
A mighty fine job you did there partner.
-- What happens in the workshop stays in the workshop. No wait that doesn't sound right. Karson Southern Delaware karson_morrison@bigfoot.com †
Russel
home | projects | blog
2030 posts in 817 days
posted 351 days ago
You combination of leather and wood is always impressive. You’ve combined the two skills masterfully. I never know which to look at first though since both tend to grab my attention.
-- When you give someone a chance it may well be their last.
rikkor
home | projects | blog
11338 posts in 752 days
posted 351 days ago
That’s just excellent! I wouldn’t mind having something like that to pick and grin upon.
MsDebbieP
home | projects | blog
14089 posts in 1038 days
posted 351 days ago
that’s sweet!!
Next: a little video of you pickin’ and grinnin’ .. I’d love to hear a tune
-- ~ Debbie, Canada (http://www.execulink.com/~yohan)
Blake
home | projects | blog
2715 posts in 752 days
posted 351 days ago
This is gorgeous! I really like the look of the wood as well as the beautiful leatherwork. I’ll have to show this to my dad (who plays guitar) and my father-in-law (who loves leatherwork and woodworking).
-- Check out my new website! http://www.blakeweberwoodworking.com
Texasgaloot
home | projects | blog
467 posts in 578 days
posted 351 days ago
I believe I hear a little Buck Owens…
Man, the tooling is flawless! I used to tool leather. Bought myself the pattern for some chaps, and never touched any of it since, I don’t know why.
Very creative project! Very rustic.
Thanks for sharing!
-- There's no tool like an old tool...
Grumpy
home | projects | blog
14852 posts in 729 days
posted 351 days ago
Great rustic look Tom. All we need now is th music to go with it.
-- Grumpy - "Always look on the bright side of life"- Monty Python
Rob Drown
home | projects | blog
324 posts in 711 days
posted 350 days ago
Beautiful leather and cool compound angles!! Nice work!!
-- Sharp tools and thin whispy shavings make woodworking a joy.