Folding Miter Box Stand

  • Advertise with us
Project by SDAdmiral posted 12-27-2014 03:54 PM 3448 views 7 times favorited 3 comments Add to Favorites Watch

After a few years of storing my miter saw on the floor and setting up sawhorses every time I used it, I decided that it was time for a change. I only had four criteria: 1.) Mobile 2.) Plenty of in-feed and out-feed support 3.) Compact 4.) Cheap or Free!

All in all I am quite pleased with it. The folding wings are very sturdy and take about 2 seconds to set up or put down.

It is still not quite finished, but is functioning quite well. Eventually I am going to add a dust extractor to the shelf below as well as a length gauge and stop block system to each of the wings.

-- - Andrew -

3 comments so far

View scarpenter002's profile


613 posts in 4146 days

#1 posted 12-27-2014 04:57 PM

Nice project. I am sure you are going to get many years of satisfaction out of this project. I look forward to the updated pictures with the fences and stop blocks added to the support wings.

Thanks for sharing.

-- Scott in Texas

View muesli's profile


403 posts in 1749 days

#2 posted 12-28-2014 09:33 AM

Great solution for small shops like mine (playing Sokoban most of the time).

-- Uwe from Germany.

View Hazem's profile


187 posts in 1489 days

#3 posted 12-28-2014 08:26 PM

Very handy. Excellent.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics