|Project by USCJeff||posted 12-26-2014 10:07 PM||597 views||0 times favorited||1 comment|
Haven’t done this kit prior (Rockler’s “Pizza Cutter Turning Kit”). I’ve gifted plenty of pens, stoppers, and mills over the years so I’m running short on unique gifts. The process is simple. The picture explains it other than the threaded insert movie installed in the turned handle. It isn’t glued to the hardware last me stoppers. It’s design allows one to unscrew the dishwasher safe hardware for cleaning.
I used a 6” length of rhinoplastic that was preshaped with a 1.5” diameter. Used a chuck on the head. The tail had a live center inserted into the predrilled hole the threaded the insert eventually was placed. Required a little hand sanding the end since it was cut off.
-- Jeff, South Carolina