LumberJocks

Steampunk Lamp with a little wood inside

  • Advertise with us
Project by rantingrich posted 12-24-2014 02:52 AM 3438 views 5 times favorited 3 comments Add to Favorites Watch

This is my finished steampunk lamp, The clock/gauge face is made of Red oak so there!!!!

-- Rich





3 comments so far

View JJohnston's profile

JJohnston

1614 posts in 2759 days


#1 posted 12-24-2014 04:19 PM

Does the light go out after a while if you sit still? I’ve been in a situation where somebody had to keep moving all the time so we wouldn’t suddenly be in the dark.

-- "A man may conduct himself well in both adversity and good fortune, but if you want to test his character, give him power." - Abraham Lincoln

View Rob's profile

Rob

704 posts in 2539 days


#2 posted 12-24-2014 04:32 PM

Very cool!

-- Ask an expert or be the expert - http://woodworking.stackexchange.com

View rantingrich's profile

rantingrich

372 posts in 813 days


#3 posted 12-24-2014 04:42 PM

The motion detector stays one for 5 minutes and that the shortest time it stay one I wish it was less. BUT if you push the top part ion of the switch you can turn it on manually or turn in off! This was one of my first steampunk pieces cause I needed a light in the front part of my house that would turn on as I walked in. Also it is grounded and I used a power tool extenuation cord to do that. A lot of the motion detectors WILL NOT WORK without a ground

3 wire for lamps is very hard to find

-- Rich

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com