| Project by clieb91 | posted 1655 days ago | 1835 views | 4 times favorited | 6 comments |  |
 |
When we had our kitchen redone after moving in we thought we choose exactly what we would need. Unfortuanlty we were wrong. While all of our cabinets came with roll out shelves they are quite small and did not do well for holding stuff like cookie sheets and a collection of stoneware.
So after see a few different ideas that I saw around here I came up with a new drawer to replace an existing one. The new one also leaves me room for further seperation if I choose to later since as I was putting it together I decided against all the dowels. I am not at the point yet to cut dovetails so I used my Kreg Jig once again and filled the holes with plugs then cut and sanded them all flush.
Since the wife likes it and it does a good job, I plan to reconfigure a few more shelves and drawers in the not too distant future.
CtL
-- Chris L. "Don't Dream it, Be it."
| Pin It |
6 comments so far
Sleff
home | projects | blog
28 posts in 1922 days
#1 posted 1654 days ago
Thats a neat idea, Ive needed something like this for years. Good Job!
-- -Sleff
woodworm
home | projects | blog
14104 posts in 1762 days
#2 posted 1654 days ago
The idea, the design and the construction skill came together and produced such a beautiful Pan Organization Box.
Great job Chris L.
-- masrol, kuala lumpur, MY.
brianinpa
home | projects | blog
1809 posts in 1895 days
#3 posted 1654 days ago
Very good idea. It gives me some insight for our tupper-ware problem.
-- Brian, Lebanon PA, If you aren’t having fun doing it, find something else to do.
Andraxia
home | projects | blog
132 posts in 1680 days
#4 posted 1633 days ago
What a cool idea! I have always wrestled in my pan cupboard for order (second only to the tupperware cupboard for disorder!)
I’ll have to plagerise your design.
-- The wood slayer - Yes dear I did plan to make more kindling out of that wood I have been drying for the last year - honest!
rikkor
home | projects | blog
11296 posts in 2046 days
#5 posted 1633 days ago
That’s a great idea. Nicely built, too. Thanks for posting it.
KregRep
home | projects | blog
29 posts in 1526 days
#6 posted 1337 days ago
Every kitchen needs one! Very nice job on the plugged Pocket-Holes… one alternative technique is to put the pocket-Holes on the back side and front of the drawer. The holes on the back will always be hidden and by using a false-front drawer on the front… you’ll be hiding those as well.
At any rate, a great addition to your kitchen, and no doubt a very handy storage solution! I’d love to have you post it on our Kreg Jig Owners’ Community if your’e interested. (link below)
Thanks!
-- KregRep | Huxley, IA | Join the Kreg Jig Owners' Community: http://kregjig.ning.com
Have your say...