|Project by edwood1975||posted 12-08-2014 02:53 AM||928 views||1 time favorited||2 comments|
There is a longer story than this but the long and the short of it is my wife needs a better more sturdier box so I came up with this simple idea and put my own touch’s on it.
Its basically made out of oak and pine.
The sides are oak and the back and front are pine. I cut a dado channel so as that I could slide the base and the lid into place. I glued the bottom into the lower dado channel as well as pocket screwed the inside together.
I made the lid out og 1/4’’ oak plywood and stained it walnut I figured it would provide good contrast to the pine and the brass side handles.
After I had just completed the box unknowns to my wife she was complaining that she needed a bigger box that she could put some of then nail accessories…soooooooo
The black tray you see in one of the pics.. its basically sitting on 4 corner pillars ( for lack of a better descriptive word) and attached a wooden knob