|Project by trainrunner||posted 12-05-2014 01:01 PM||1126 views||3 times favorited||5 comments|
I found some plans for this a while back and finally got around to building it. The plans were fairly vague but it gave me an idea with where to start. I used pine for most of it and cedar for the branches and the trunk. I just sprayed it with a clear coat when I finished. On the last picture I was gluing in the door stops so I built a little stand for it and set it upside down in there to install them. It was fairly tedious but I think it turned out pretty good.
-- Work- helping fill out my workshop but giving me no time to use my toys.