LumberJocks

Moxon Vise on the Cheap Woodworking Project and Video

  • Advertise with us
Project by Warren1971 posted 12-05-2014 04:30 AM 2855 views 27 times favorited 12 comments Add to Favorites Watch

I made this Moxon Vise for my workbench and created a YouTube tutorial for those who are interested in building one.

Its a simple project that can be knocked out in a day with limited tools, the parts are cheap to buy as well.

You can view the project video here http://youtu.be/BW1DTpzXmG8

I hope you like it.

Cheers
Warren

-- Cheers Warren - www.onewood.com.au YouTube Video Creator





12 comments so far

View Babieca's profile

Babieca

163 posts in 1289 days


#1 posted 12-05-2014 04:54 PM

Straight to favorites. I will definitely be making one of these.

View JoeinDE's profile

JoeinDE

442 posts in 3108 days


#2 posted 12-05-2014 08:20 PM

Aren’t they fun to make? Mine cost about $25 when you factor in the cost of the lumber and the hardware.

-- https://www.etsy.com/shop/JMsWoodCreations

View rhybeka's profile

rhybeka

3366 posts in 2906 days


#3 posted 12-05-2014 10:08 PM

Warren you are one of my new heroes :) Thanks a bunch for this!

-- Beka/Becky - aspiring jill of all trades, still learning to not read the directions.

View Randy_ATX's profile

Randy_ATX

855 posts in 2227 days


#4 posted 12-05-2014 10:18 PM

Yes! Thank you.

-- Randy -- Austin, TX by way of Northwest (Woodville), OH

View Darrell's profile

Darrell

12 posts in 1058 days


#5 posted 12-06-2014 12:45 AM

Really cool! Really like how that finish looks on there, Nice job!

View doubleDD's profile

doubleDD

6629 posts in 1828 days


#6 posted 12-06-2014 12:59 AM

Good work.Will probably use it.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View sepeck's profile

sepeck

335 posts in 1926 days


#7 posted 12-06-2014 04:15 AM

I noticed in some builds, they shave one of the clamps up to 11 degrees to help give a better clamp. Have you found that is not necessary?

-- -Steven Peck, http://www.blkmtn.org

View Warren1971's profile

Warren1971

57 posts in 1730 days


#8 posted 12-06-2014 08:12 PM

Thanks for that i appreciate the kind words.


Warren you are one of my new heroes :) Thanks a bunch for this!

- rhybeka


-- Cheers Warren - www.onewood.com.au YouTube Video Creator

View Warren1971's profile

Warren1971

57 posts in 1730 days


#9 posted 12-06-2014 08:14 PM

I have not noticed i need to do that, the only think i have done is use a wedge at the bottom of the clamp if i put something in it that just sits in the top inch or so, this way i get even clamping preasure.


I noticed in some builds, they shave one of the clamps up to 11 degrees to help give a better clamp. Have you found that is not necessary?

- sepeck


-- Cheers Warren - www.onewood.com.au YouTube Video Creator

View Warren1971's profile

Warren1971

57 posts in 1730 days


#10 posted 12-06-2014 08:16 PM

I have not noticed i need to do that, the only think i have done is use a wedge at the bottom of the clamp if i put something in it that just sits in the top inch or so, this way i get even clamping preasure.


I noticed in some builds, they shave one of the clamps up to 11 degrees to help give a better clamp. Have you found that is not necessary?

- sepeck


-- Cheers Warren - www.onewood.com.au YouTube Video Creator

View Gianni's profile

Gianni

232 posts in 1759 days


#11 posted 12-07-2014 12:59 AM

Saw this the other day and made a not to build one. I have several big chunks of threaded rod with no set purpose other than building garage machines. Lack a welder, so I’ll have to cipher on an alternative for that.

View Warren1971's profile

Warren1971

57 posts in 1730 days


#12 posted 12-07-2014 01:32 AM

Hi Gianni If you drill a hole through the rod and nut you can use a split pin or a nail and when you expoxy it into the handle i dont think it will move.


Saw this the other day and made a not to build one. I have several big chunks of threaded rod with no set purpose other than building garage machines. Lack a welder, so I ll have to cipher on an alternative for that.

- Gianni


-- Cheers Warren - www.onewood.com.au YouTube Video Creator

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com