Hall lockers

  • Advertise with us
Project by spclPatrolGroup posted 12-02-2014 05:27 AM 1701 views 7 times favorited 2 comments Add to Favorites Watch

My sister in law saw some hall lockers in a magazine and wanted a set for herself built into the entry way. It’s all made out of pine and birch plywood, it stands about 8’ tall and a little over 5’ wide, each locker is about 12×12. The best part of the whole thing was that I just had to make it and drop it off in pieces at their house for my brother to stain, then show up for the install. I made everything about 1/8” wider than I thought it would need to be, the plan was to plane down the sides of the face frames and the tops to fit the space, I am glad I did because everything fit perfectly with no adjustments needed. I guess I forgot to take many pictures after I finished the base. She was going to maybe find some baskets that would fit the bottom spaces, but it’s kind of an odd size to find baskets for, I offered to make some wooden bins but I think they like it as is.

2 comments so far

View ohwoodeye's profile


2106 posts in 3355 days

#1 posted 12-02-2014 02:08 PM

Looks nice. Lesson learned I hope…........pick out the baskets first then build according to their size. Really like the look of the slats in the back.
Well done.

-- Directions are just the Manufacturer's "opinion" on how something should be assembled. ----Mike, Waukesha, WI

View Ken90712's profile


17594 posts in 3390 days

#2 posted 12-02-2014 04:34 PM

Wll done great use of the space, like color as well. I’m sure it will alot of use.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics