|Project by GCWC||posted 11-28-2014 09:10 PM||2030 views||7 times favorited||5 comments|
built this clamping jig for a miter joint, nothing more than scrap wood, a piece of plywood, and a piece of 1 inch dowel rod that is glued and brad nailed, and a filler piece. this works great, when making a flag display and not a complete square or box.
clamp to the sides first to hold them in place, then you can draw them together with the center clamp on the dowel rod.
I made a couple more so I can have more than one going at the same time