LumberJocks

Turned Box

  • Advertise with us
Project by diggerdelaney posted 11-23-2014 05:59 PM 936 views 1 time favorited 11 comments Add to Favorites Watch

While waiting for some wood for my next project I thought I would get a little turning in so I produced this little box from an unknown piece of wood. It is finished with danish oil then buffed the three lines are there to disguise the joint between the lid and bottom, the lid has some texturing which is stained then gold wax is applied to highlight the texturing

-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/





11 comments so far

View LesB's profile

LesB

1249 posts in 2947 days


#1 posted 11-23-2014 06:11 PM

Nice looking. You didn’t give the size but I always find it fun to turn small things like that. They often become hostess gifts when we are invited out. Much better than a bunch of flowers that wilt or wine that is consumed and forgotten.

-- Les B, Oregon

View diggerdelaney's profile

diggerdelaney

377 posts in 3254 days


#2 posted 11-23-2014 06:16 PM

Sorry Les it is 3 1/2” tall and 3” at its widest

-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/

View RogerBean's profile

RogerBean

1603 posts in 2457 days


#3 posted 11-23-2014 06:37 PM

Nicely done.
Roger

-- "Everybody makes mistakes. A craftsman always fixes them." (Monty Kennedy, "The Checkering and Carving of Gunstocks", 1952)

View Arlin Eastman's profile

Arlin Eastman

3584 posts in 2065 days


#4 posted 11-23-2014 06:38 PM

From someone that has done a lot of boxes I would like to tell you WELL done.

-- Please help me help other Vets click..> http://www.gofundme.com/m1abko.....It is always the right time, to do the right thing.

View NormG's profile

NormG

5555 posts in 2508 days


#5 posted 11-23-2014 07:04 PM

Great job, love the chattering on the top as well as the rings on the body

-- Norman - I never never make a mistake, I just change the design.

View crowie's profile

crowie

1582 posts in 1455 days


#6 posted 11-23-2014 09:04 PM

Very nicely done Derek,
Even though the timber species is unknown, it’s certainly beautiful.

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View KnotCurser's profile

KnotCurser

1996 posts in 2572 days


#7 posted 11-23-2014 09:47 PM

Great work – I like how you hid the lid joint within the ring.

-bob

-- Robert Rhoades WoodWorks / Email: rrww@rhoadesclan.com / www.rhoadesclan.com

View Gary's profile

Gary

1216 posts in 3828 days


#8 posted 11-24-2014 12:28 AM

Very nice looking.

-- Gary, Florida

View tomd's profile

tomd

2033 posts in 3274 days


#9 posted 11-24-2014 03:18 AM

Very nice turning, like the texturing touch.

-- Tom D

View Diggerjacks's profile

Diggerjacks

2134 posts in 2643 days


#10 posted 11-24-2014 06:32 PM

Hello Digger !

Very nice and fine work

I like it

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View peteg's profile

peteg

3904 posts in 2327 days


#11 posted 11-24-2014 08:29 PM

I saw this on the UK site Derek, well done, it is a fairly plain piece of timber but you have ramped it up with the subtle decoration, :)
cheers
pete

-- Pete G: If you always do what you always did you'll always get what you always got

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com