|Project by Jerry Spencer||posted 11-19-2014 05:02 PM||8542 views||8 times favorited||9 comments|
I found a neat stand for a DeWalt planer that caught my eye on http://www.ibuildit.ca/. I made a few changes to it. I added sliding handles so it’s easier to move because of the weight of the planer. Instead of running the melamine through the planer I made a longer shelf out side to prevent snipes. I found out that because of the force the chip fan has you need a very tight fit on the plastic can to prevent blowing the chips out. I also doubled the vent screen to keep the fine chips in the can.
-- Jerry - Ohio