LumberJocks

Lathe Cabinet

  • Advertise with us
Project by KE4NYV posted 11-17-2014 03:57 PM 936 views 1 time favorited 4 comments Add to Favorites Watch

This is my latest cabinet project for my shop re-build. It’s a cabinet sized to mount under my lathe’s bed, but not sitting on the floor. It’s made from 3/4” and 1/2” birch plywood. One swing open door for a cabinet and two slide out drawers.

The cabinet is mounted to the lathe using pan head screws through holes drilled in the bottom rails. I also added my lathe tool rack to the back of it, using french cleats.

-- Jason R.





4 comments so far

View mudflap4869's profile

mudflap4869

1158 posts in 926 days


#1 posted 11-17-2014 07:09 PM

I really need to borrow your great idea for both the lathe and the shopsmith.

-- Still trying to master kindling making

View KE4NYV's profile

KE4NYV

135 posts in 929 days


#2 posted 11-17-2014 08:03 PM



I really need to borrow your great idea for both the lathe and the shopsmith.

By all means! Just make sure to post the project here so everyone else can see what you came up with.

-- Jason R.

View drnic's profile

drnic

59 posts in 847 days


#3 posted 11-17-2014 08:07 PM

Nice! What are those hinges called, “Zero-clearance overlay” or something?

View KE4NYV's profile

KE4NYV

135 posts in 929 days


#4 posted 11-17-2014 08:14 PM



Nice! What are those hinges called, “Zero-clearance overlay” or something?

I’m not sure about the zero-clearance, but they are full overlay hinges. I buy the ten pack at Home Depot. Tried the ones at Lowe’s and they were pretty crappy. The brand available at Home Depot are much better.

-- Jason R.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com