Table Saw Cabinet

  • Advertise with us
Project by Lorin posted 11-17-2014 01:33 AM 9876 views 38 times favorited 21 comments Add to Favorites Watch

I think this has been a project for the last two years. However, as soon as I could put the saw into it, I did. Then finishing it in place. Space in my garage is tight and I needed to leverage the utility as soon as it was doable. At this point I just need to add the back, drawer fronts, doors and an apron. Its pretty simple; a platform with three separate boxes connected together, then filled out. If necessary it would be simple to modify for a new saw. Is sits on six casters and is on blocks when in use. I decided to attach the ductwork so I could just plug in the flex hose when in use. For my small and ever-changing shop, this solution works well. All my tools now have built-on duct work with and 6” quick disconnect. Thanks for looking.

-- Lorin

21 comments so far

View bruc101's profile


1255 posts in 3718 days

#1 posted 11-17-2014 01:59 AM

Awesome job and beautiful cabinet.

If you’ve got a wife and she sees that you may be giving up that one for a piece of furniture in her home.

Don’t forget daughter’s and nieces. I’ve got nieces that have developed a technique to con me into building them just about anything they want. They’re like our daughters..con artist.

-- Bruce Free Plans

View a1Jim's profile


117279 posts in 3753 days

#2 posted 11-17-2014 02:14 AM

Very nice work Lorin.

-- wood crafting & woodworking classes

View Fiddy's profile


187 posts in 1487 days

#3 posted 11-17-2014 03:19 AM

Awesome job, very meticulous! I was curious what router table extension is that?

View becikeja's profile


932 posts in 2989 days

#4 posted 11-17-2014 12:32 PM

Now that’s nice

-- Don't outsmart your common sense

View GT350's profile


370 posts in 2158 days

#5 posted 11-17-2014 01:43 PM

Nice job.

View BigNate78's profile


10 posts in 1467 days

#6 posted 11-17-2014 03:01 PM

Super nice job….It’ll be a few years until I’m that good or have a shop that clean.

View SCOTSMAN's profile


5849 posts in 3761 days

#7 posted 11-17-2014 03:50 PM

Wow what a really nice, neat set up, Also custom made to your own requirements.This is looking very good. Alistair

-- excuse my typing as I have a form of parkinsons disease

View drewpy's profile


821 posts in 1533 days

#8 posted 11-17-2014 04:10 PM

Holy smokes! I would take my pillow and sleep on that at night. Great work and great design. Thanks for sharing.

-- Drew -- "The greatest wealth is health".

View gbear's profile


517 posts in 4275 days

#9 posted 11-17-2014 05:05 PM

Very nice…well done.

-- gbear, Carmichael, CA

View Richard's profile


1922 posts in 2867 days

#10 posted 11-17-2014 05:21 PM

Don’t take this the wrong way but , That table Sucks. Very good design and great use of the space.

View hoss12992's profile


4073 posts in 2069 days

#11 posted 11-17-2014 05:48 PM

That is awesome. Love it

-- The Old Rednek Workshop

View Danskeren's profile


4 posts in 1493 days

#12 posted 11-17-2014 06:12 PM

Very nice solution with good ideas. Perhaps we should make one ourself. Thank you for sharing your solution.

Rigtig flot løsning med gode ideer. Måske man skulle lave en selv. Tak fordi du delte din løsning

-- Henrik, Danmark (Denmark)

View majuvla's profile


13234 posts in 3044 days

#13 posted 11-17-2014 07:04 PM

Such a nice piece of table I wouldn’t mind to put into my dinnig room.

-- Ivan, Croatia, Wooddicted

View Lee A. Jesberger's profile

Lee A. Jesberger

6866 posts in 4156 days

#14 posted 11-17-2014 07:09 PM

Beautiful job.

Excellent workmanship.


-- by Lee A. Jesberger

View droppedtuning's profile


31 posts in 1977 days

#15 posted 11-17-2014 07:17 PM

amazing job

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics