LumberJocks

wall clock

  • Advertise with us
Project by knockknock posted 10-26-2014 02:01 PM 1095 views 0 times favorited 5 comments Add to Favorites Watch

This is a Paul Sellers wall clock project (free video). If you build it his way (which I did) you have to hit your marks. I missed a few, made a second top plate, and finished it off. I also cheated a little using a hollow to finish the bull nose, a scratch stock for the beading, and raised the panel with a fenced rabbet.

The wood is basswood, the finish is oil and wax, the approximate dimensions are 23” x 12”, clock face 6.5”





5 comments so far

View Jim Jakosh's profile

Jim Jakosh

17118 posts in 2566 days


#1 posted 10-26-2014 09:36 PM

Nice job on the clock!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View knockknock's profile

knockknock

337 posts in 1633 days


#2 posted 10-27-2014 12:27 AM

Thanks.

View RustyHacksaw's profile

RustyHacksaw

82 posts in 724 days


#3 posted 07-16-2015 04:07 PM

That’s awesome. Great job. Did you try raising the panel the way he shows? That’s my next technique to try.
Thanks for sharing.

View knockknock's profile

knockknock

337 posts in 1633 days


#4 posted 07-19-2015 12:41 PM

Did you try raising the panel the way he shows?
- RustyHacksaw

Yes I have, they are facing the inside on my tool chest. They were close, but not quite right. Which is why I used a fenced rabbet when raising the panel for this clock. I knew I wasn’t ready to free hand it like Paul Sellers does.

View JoeinGa's profile

JoeinGa

7475 posts in 1467 days


#5 posted 07-19-2015 01:13 PM

Nice clock.
See that piece the clock is sitting on in picture 2 ? I would have used that for the top, just as it is with the rough bottom side up.

-- Perform A Random Act Of Kindness Today ... Pay It Forward

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com