Next Stool in line

  • Advertise with us
Project by Monte Pittman posted 10-19-2014 12:22 AM 1735 views 1 time favorited 22 comments Add to Favorites Watch

Trying different seat designs. I personally like this one a lot better. I still need more contour in the back however. Still Beetle Kill Pine. The next modification will be the bases.

Thanks for reading and all comments and suggestions are welcome.

-- Mother Nature created it, I just assemble it.

22 comments so far

View DocSavage45's profile


7648 posts in 2262 days

#1 posted 10-19-2014 01:04 AM


To me it looks like a secretarial office chair? I’m sure you are thinking about efficiency in production and materials involved. guess I prefer the last stool over this design.

Have you considered a three legged stool with this top?

Good to see you challenging yourself!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View hoss12992's profile


3810 posts in 1312 days

#2 posted 10-19-2014 01:12 AM

That looks really good and very comfortable. Great job buddy

-- The Old Rednek Workshop

View jaykaypur's profile


3996 posts in 1828 days

#3 posted 10-19-2014 01:46 AM

I like them all. After you get through with all these prototypes, you will have a NICE set of mix matched bar stools that you could sell as a set! Great work Monte.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View firefighterontheside's profile


13068 posts in 1276 days

#4 posted 10-19-2014 02:37 AM

It’s cool Monte. I want to sit on it. Thinking of chair arms, I wonder if with your previous iteration you could have the arm come out of the back and not the base. It could be a piece in the glue up.

-- Bill M. "People change, walnut doesn't" by Gene.

View doubleDD's profile


5056 posts in 1463 days

#5 posted 10-19-2014 02:44 AM

This one has a bar stool look. I would have a drink on it. Nice work.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Gary's profile


8965 posts in 2852 days

#6 posted 10-19-2014 02:49 AM

Great work, Monte

-- Gary, DeKalb Texas only 4 miles from the mill

View Sandra's profile


6933 posts in 1495 days

#7 posted 10-19-2014 03:21 AM

Monte, I like the look of the back on this one much better. The previous design looked top heavy, if that makes any sense. Of course to truly offer an opinion one would have to sit in it after a few drinks.

-- No, I don't want to buy the pink hammer.

View OldWrangler's profile


731 posts in 1014 days

#8 posted 10-19-2014 04:49 AM

I really like the stool but as nice as this one is, I prefer the look of the one with the double back supports. Just looks sturdier. Love the wood. I wish I had me some of that.

Sandra, my wife has a pink hammer and hammers like lightening…..never strikes in the same spot twice. But that is not the hammer’s fault. Since I am next in line, the dented wood around a nail and the bent nail are both my fault. I don’t understand her explanation but she has convinced me I am at fault.

Monte, your work always amazes and inspires me and then I remember I don’t have a National Forest in my back yard and all the wood to chose from. I want some tracking numbers tomorrow…now I have a commissioned Cedar chest to build from todays show. BKP shell lined with Cedar, domed top and on casters.
We got a small Cedar mill about 1/2 hour away that I just discovered and next week after I get new batteries put in my pacemaker, I’ll get up there and shop.

-- I am going to go stand outside so if anyone asks about me, tell them I'M OUTSTANDING!

View CFrye's profile


8566 posts in 1259 days

#9 posted 10-19-2014 08:11 AM

Monte, I like the larger sections of the BKP this version allows. Other than that, I can’t decide which one I like better. Needs a sit down test, I guess! Thanks for sharing.

-- God bless, Candy

View Wayne Dailey's profile

Wayne Dailey

172 posts in 2603 days

#10 posted 10-19-2014 11:55 AM

Lookin good Monte

View bowtie's profile


971 posts in 1766 days

#11 posted 10-19-2014 12:04 PM

Monte, this is a nice looking stool but I prefer the one with 2 back supports…...........
could just be the angle the picture was taken from.

-- bowtie,.....jus passin thru....

View HillbillyShooter's profile


5811 posts in 1712 days

#12 posted 10-19-2014 01:11 PM

DocSavage45 +1. :-)

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View DIYaholic's profile (online now)


19137 posts in 2095 days

#13 posted 10-19-2014 01:12 PM

Yup, further testing is needed….
To determine a favorite from among all the iterations.

You’re going to need to pour a round for the house….
Make mine a tall & frosty cold one!!!
Of course, it will need to be served in one of you wooden mugs!!!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View Blackie_'s profile


4527 posts in 1932 days

#14 posted 10-19-2014 01:52 PM

Monte, you did another excellent though beauty is in the eyes of the beholder, I have to agree that the first design appeals to me more but that’s just me, again out of the park on this one as well.

-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at

View NormG's profile


5424 posts in 2423 days

#15 posted 10-19-2014 07:03 PM

Great piece, love the design and look very comfy

-- Norman

showing 1 through 15 of 22 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics