|Project by edwood1975||posted 10-07-2014 09:11 PM||1820 views||6 times favorited||4 comments|
I decided that I needed a project that gave me an excuse to use my new router, and this is what I decided to build, I am very happy how it turned out and I learned some valuable lessons along the way.
I also had to have a side project in building a dado jig because that is the joint I used in putting all the pieces together.
I am proud to say that there is only 4 screws in this whole piece.
I built it using 8×1 sanded pine wood and glue I also purchased feet for the finished product but I didn’t like them so I routered my own using the same bit.
I hope you like it and it looks awesome in my kitchen because the stain I used is the same as my kitchen cabinets.
PS: This unit holds (4 iPhones and 1 Ipad)
Just to update this project I made a much better version of this charging unit a link is below
It’s better because I built a integrated powerstrip compartment for a more functional charging station