LumberJocks

Circular Saw - Rip Cut Jig

  • Advertise with us
Project by Armand posted 10-07-2014 08:52 AM 17270 views 25 times favorited 6 comments Add to Favorites Watch

Been ripping plywood sheets for my shoe cabinet projects and this jig is a great help in cutting down plywoods into different widths. Made of 1/2” leftover plywoods, 3/8” bolt and a T-nut as the lock. A one peso coin is placed under the bolt to prevent marking or damage on the sliding t-square. There was little space left for the knob because it gets in the way of the motor when I plunge the saw so the actual is a very small round knob, different from the plan. It accomplished 2 cutting lists in less than ten minutes using only 2 F-clamps. The only time I used the pencil is when I wrote the cutting lists.

Here’s the Youtube Video of my jig.

http://youtu.be/jTQQEHxSNpk

-- My Master is Mankind's Greatest Carpenter.





6 comments so far

View patron's profile

patron

13538 posts in 2807 days


#1 posted 10-07-2014 12:41 PM

very nice armand

simple and straight forward
compact

one of the better ways i’ve seen
for hand ripping

with a crosscut jig
you got it made

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View BinghamtonEd's profile

BinghamtonEd

2281 posts in 1836 days


#2 posted 10-07-2014 02:31 PM

Nice solution, and well-executed.

-- - The mightiest oak in the forest is just a little nut that held its ground.

View Surfside's profile

Surfside

3389 posts in 1640 days


#3 posted 10-07-2014 09:24 PM

That’s just brilliant. Thanks for sharing.

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View oldskoolmodder's profile

oldskoolmodder

799 posts in 3146 days


#4 posted 10-08-2014 05:21 PM

I temporarily became dislexic because I thought the title said it was a jig for your saw to cut circles. Nice project, thinking I should make one myself.

-- Respect your shop tools and they will respect you - Ric

View SamBev's profile

SamBev

10 posts in 815 days


#5 posted 10-09-2014 04:57 PM

That is a very cool jug, thanks for sharing.

View trophyjoe's profile

trophyjoe

42 posts in 1714 days


#6 posted 10-15-2014 02:41 PM

Can’t wait to build this. Too old to wrangle full sheets on the table saw. This will be a time saver for sure. Thanks!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com