|Project by oldskoolmodder||posted 10-22-2008 05:12 AM||4471 views||3 times favorited||3 comments|
So, I’m constantly in need of organization, not only in life, but especially in the truck. This was my Sunday project, this past and wonderful weather(ed) weekend, made only with my Ryobi cordless circular saw & 2 cordless drills, um, plus screws.
1/2” MDF 24×36” with 14” underneath to fit my work bags and other various things needed. Also, not shown, there is a support going across the middle side to side underneath. Throw in 1 1/2 – 2×4’s & a few scrap pieces of 2” wide pine I had in the back of the truck.
The purpose as stated above was to provide a shelf in the back of the Trailblazer to carry and store my things, but also to have a portable workbench that I could clamp onto my 2 stools that I carry to jobs. I MAY, put a few bolts with wing nuts to attach them better though.
Oh yeah, a small tarp underneath, so I don’t have to keep vacuuming the sawdust and bits out.
-- Respect your shop tools and they will respect you - Ric