LumberJocks

Shaper tooling cabinet

  • Advertise with us
Project by Greedo posted 09-19-2014 06:57 PM 1598 views 0 times favorited 2 comments Add to Favorites Watch

My collection of shaper cutters has grown out of control so they needed a good storage solution.
I came up with this wall cabinet with angled shelves for a better overview. The shelves hook onto the shelf pegs with a groove in the bottom, so they can’t slip and fall.
When i need a cutter i lift out the shelf which serves as a rest, this prevents you from having to lay the cutter on the iron table which had sometimes lead to breaking some of the carbide elements.

The middle section is used for storage of smaller things like spare carbide cutters etc… on the door i hung the tools needed to loosen the spindle.
There is also one shelf reserved for spacing rings, sorted by thickness.

The cabinet is made of melamine panels and the doors out of beech wood.

Below is a video of the construction!

https://www.youtube.com/watch?v=oMk8RceCCu4





2 comments so far

View kaerlighedsbamsen's profile

kaerlighedsbamsen

1177 posts in 1174 days


#1 posted 09-19-2014 07:34 PM

Simple and practical design. Lovely to see fine things being made of melamine.
Enjoyed the video a lot and looked thorugh some of your other stuff. Quite innoveative stuff there..
Thanks or sharing!

-- "Do or Do not. There is no try." - Yoda

View mafe's profile

mafe

11137 posts in 2550 days


#2 posted 09-20-2014 07:36 PM

Looks wonderful, I am highly jealous in the kindest way.
Best thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com