LumberJocks Woodworking Forum banner

Project Information

My second try at box building and the first with a cavetto top. The box is 9" x 6" x 4" and is birds eye maple veneer over a 1/2" Baltic birch ply box. The Cavetto molding was built up using MDF. African blackwood was used for the edging and base molding. Brusso hinges and mocha suede interior with a lacquer finish. The brass makers mark or the bottom was acid etched brass and then copper electroplated with a light sanding to expose the raised lettering.
Thanks for looking,

Paul

Gallery

Comments

· Registered
Joined
·
21 Posts
Very nice looking. Thanks for sharing!
 

· Registered
Joined
·
387 Posts
Paul,
Looks good. The cavetto lid can be a challenge. Looks like you've mastered it. Nice job.
Roger
 

· Registered
Joined
·
2,183 Posts
Beautiful. I would love to see how the lid is done. Im looking forward to see your future projects. Welcome to LJs
 

· Registered
Joined
·
11,255 Posts
Gorgeous.
 
Top