LumberJocks

Wood Wall Art

  • Advertise with us
Project by prestigedesigns posted 09-10-2014 08:50 PM 1223 views 0 times favorited 4 comments Add to Favorites Watch

Prestige designs Presents… Wall Art Wednesday… Made with reclaimed plywood in ART… Some are routered at the edges while some are left sanded. I will oil all of the edges… These pieces of wood where used for Template making with SHARP blades embedded in each… Also check out my other “reuse Designs” on facebook.. to see my facebook just click on the blue Prestige Designs.

-- Prestige Designs, Georgia, www.facebook.com/prestigedesign





4 comments so far

View copcarcollector's profile

copcarcollector

254 posts in 1583 days


#1 posted 09-11-2014 02:01 AM

Laser engraved? If so, what brand/size laser do you have? Looking into an Epilog myself.

View prestigedesigns's profile

prestigedesigns

31 posts in 835 days


#2 posted 09-11-2014 02:59 PM

This is print on wood…

-- Prestige Designs, Georgia, www.facebook.com/prestigedesign

View DurhamAzeotropes's profile

DurhamAzeotropes

7 posts in 955 days


#3 posted 09-12-2014 02:46 PM

you can use gel matte to transfer laser jet prints (like from a laser jet printer) onto wood, A cheaper solution for those that don’t have a laser engraver.

View DurhamAzeotropes's profile

DurhamAzeotropes

7 posts in 955 days


#4 posted 09-12-2014 03:06 PM

its a pretty easy method, you just have to use a soft wet sponge to wipe the paper off after its dried. I did this just to see if it would work, took this picture about half way through wiping the paper off (so there is still some visible paper fibers) but you get the idea.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com