LumberJocks

Charging Box

  • Advertise with us
Project by Ryan posted 09-10-2014 06:12 PM 1620 views 2 times favorited 3 comments Add to Favorites Watch

This is a very simply made box to hold many battery chargers and part of
my soon to be finished camera station.
No screws and joinery is used, it simply glued. Just cut and glued.
I want to test the strength of Titebond and if it’s good, maybe use more often.
If anyone made a box this way, let me know the long term durability.





3 comments so far

View hotncold's profile

hotncold

762 posts in 1006 days


#1 posted 09-10-2014 10:18 PM

I use Titebond glue on almost every joint and if you used adequate amounts (and clamped until dry), it will be stronger than the wood it’s bonding.
Nice idea!

-- Dennie - Tennessee

View hotncold's profile

hotncold

762 posts in 1006 days


#2 posted 09-10-2014 10:20 PM

Sorry, my mistake! I use Titebond II primarily. I don’t know if I’ve ever used the original Titebond.

-- Dennie - Tennessee

View Ryan's profile

Ryan

238 posts in 2392 days


#3 posted 09-11-2014 12:56 AM

I use Titebond II but I was told there is no difference in strength other than moisture resistance.
When gluing something I always get additional help like dovetails, dowels, pins…
But this time I just glued, so have a little doubt on strength.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com