LumberJocks

Deviant Chevron Cutting Board

  • Advertise with us
Project by nonickswood posted 09-04-2014 03:16 PM 2698 views 9 times favorited 30 comments Add to Favorites Watch

Used a replaceable stop on table-saw to cut strips, two narrow two wide and so on, then roll every other strip 180 then reverse direction of every other set. To avoid slipping when glued up, I glued 4 strips at a time, re-clamped wait then glue 4 more. Still had a little slipping but not bad.
Woods are Cherry, Holly, Wenge, & Rosewood.
Measures 17” x 12” x 3/4”
Finger slots are cut into the ends.

Thanks for looking!

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD





30 comments so far

View CFrye's profile

CFrye

9762 posts in 1624 days


#1 posted 09-04-2014 03:25 PM

That’s a beauty, Nick! A lot of time and effort went into it. Thanks for sharing.

-- God bless, Candy

View bannerpond1's profile

bannerpond1

397 posts in 1683 days


#2 posted 09-04-2014 03:31 PM

Over-the-top terrific!

Since I’ve made many end-grain boards, I figured out what you did. I just never did anything so intricate and so impressive.

Hats off to you, Sir!

-- --Dale Page

View Mr M's Woodshop's profile

Mr M's Woodshop

417 posts in 2851 days


#3 posted 09-04-2014 03:35 PM

Definitely a “wow!”

To get the chevron pattern, how long was your original blank to get the 17” final length? And … what will you use that off cut for?

-- Henry Mowry, Santa Clarita, CA, http://www.MowryJournal.com

View nonickswood's profile

nonickswood

549 posts in 2171 days


#4 posted 09-04-2014 03:41 PM

Henry, Thanks for looking, the blanks were about 24” long, it was glued up on 45 degree angle so as to not have a lot of waste.
However I have used prior end cuts in this fashion Cheese Board with Wire Knife

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD

View Joe Weaver's profile

Joe Weaver

513 posts in 3471 days


#5 posted 09-04-2014 04:09 PM

its beautiful, im blown away

-- Joe, Ga

View steve_in_ohio's profile

steve_in_ohio

1195 posts in 1395 days


#6 posted 09-04-2014 04:19 PM

wow, that is awesome, great job

-- steve, simple and effective woodworking---etsy.com/shop/SussmanWoodworking--

View majuvla's profile

majuvla

10836 posts in 2652 days


#7 posted 09-04-2014 04:21 PM

Outstanding pattern! Lot of work and effort, I bet.The colours are great!

-- Ivan, Croatia, Wooddicted

View hotncold's profile

hotncold

762 posts in 1329 days


#8 posted 09-04-2014 06:13 PM

Wow! Very nice!

-- Dennie - Tennessee

View JeremyR's profile

JeremyR

11 posts in 1237 days


#9 posted 09-04-2014 06:13 PM

Great job! I love the contrast of the Holly against the Wenge. Its amazing how white the Holly is. Im curious how you got the board so flat and smooth?

View degoose's profile

degoose

7217 posts in 3139 days


#10 posted 09-04-2014 08:34 PM

I like…

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

View turnkey47's profile

turnkey47

241 posts in 2476 days


#11 posted 09-04-2014 10:01 PM

wow!!! that is an outstanding board!!!!

View JL7's profile

JL7

8587 posts in 2749 days


#12 posted 09-04-2014 10:38 PM

Wow – that’s cool…....nice work!

-- Jeff .... Minnesota, USA

View hoss12992's profile

hoss12992

3900 posts in 1677 days


#13 posted 09-04-2014 10:45 PM

Absolutely AMAZING

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View Northwest29's profile

Northwest29

1603 posts in 2275 days


#14 posted 09-04-2014 10:51 PM

That is just way too gorgeous! Almost hurts my head to look at it. (-: Well crafted for certain.

-- Ron, Eugene, OR, "Curiosity is a terrible thing to waste."

View Dusty56's profile

Dusty56

11814 posts in 3472 days


#15 posted 09-05-2014 12:02 AM

Beautiful board : )

-- I'm absolutely positive that I couldn't be more uncertain!

showing 1 through 15 of 30 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com