|Project by Celticscroller||posted 09-04-2014 03:45 AM||1522 views||6 times favorited||12 comments|
I used Keith Fenton’s pattern for this project. I like to give myself a challenge when putting projects together so instead of attaching the base with screws I decided to set the front and back panels into the base. The front and back panels are cut from mahogany with a veneer attached – not sure what the veneer is. It came from a bunch of different veneers that I was given. The base is cut from yellow cedar and I burnt a decorative edge onto it.
Comments are always welcome. Thanks for looking.
-- Anna http://richmondcarvers.com/