|Project by Brett StClair||posted 09-03-2014 07:56 PM||4944 views||12 times favorited||3 comments|
There have been several posts on LJs for this Kerfmaker thing. I researched it and found several different versions. I wanted one that could adjust for different saw kerfs so this is what I built. I am also showing my first test cut with just a standard thin kerf table saw blade. It worked perfectly. I have never had such good dado results from my table saw.
For the Kerfmaker I used blue T-track, maple, a couple of T nuts that I ground down to fit in the T track, and a couple of 1/4-20 brass thumbscrews.
I believe this now qualifies me for membership into the secret brotherhood of Kerfmaker owners.
-- "Make things as simple as possible... but not any simpler." - Albert Einstein