LumberJocks

End grain

  • Advertise with us
Project by degoose posted 09-03-2014 08:13 AM 1984 views 2 times favorited 17 comments Add to Favorites Watch

Made an end grain board from new guinea rosewood… and added an end grain border of camphor laurel and rosewood…3 inches thick…
Finger recesses routered in the sides… and little rubber feet [inserted into holes drilled at the corners]
Last two pics are of a plain end grain… rosewood again…finger grips and feet also…only 2 1/2 inch thick…

-- Don't drink and use power tools @ lasercreationsbylarry.com.au





17 comments so far

View robscastle's profile

robscastle

4307 posts in 1988 days


#1 posted 09-03-2014 08:21 AM

Looking good Larry

3 and 2.5 ” thats one big heffer !!

-- Regards Robert

View Ken90712's profile

Ken90712

17472 posts in 2973 days


#2 posted 09-03-2014 08:48 AM

Great job Larry. Love the wood, haven’t yet worked with that type. I like the boarder and the way you did the corners on it. Nice touch.

-- Ken, "Everyday above ground is a good day!"

View woodshopmike's profile

woodshopmike

225 posts in 1448 days


#3 posted 09-03-2014 08:55 AM

That’s a good looking board!

-- www.woodshopmike.com, www.woodshopmikestudio.etsy.com

View Monte Pittman's profile

Monte Pittman

26336 posts in 2122 days


#4 posted 09-03-2014 09:20 AM

Beautiful board. Beautiful woods.

Is it very heavy?

-- Mother Nature created it, I just assemble it.

View nonickswood's profile

nonickswood

549 posts in 2171 days


#5 posted 09-03-2014 09:25 AM

Beautiful wood & Nice and Beefy!

-- Nick, Virginia, http://www.etsy.com/shop/NONICKSWOOD

View BobWemm's profile

BobWemm

2306 posts in 1710 days


#6 posted 09-03-2014 10:56 AM

Looks good to me. Great job.
Thanks for showing.

Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View stefang's profile

stefang

15512 posts in 3118 days


#7 posted 09-03-2014 12:33 PM

Great looking board Larry. I love the rosewood and camphor together. The border is really nice too.

-- Mike, an American living in Norway.

View Roger's profile

Roger

20871 posts in 2588 days


#8 posted 09-03-2014 12:33 PM

Those are very nice Larry

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View grizzman's profile

grizzman

7836 posts in 3087 days


#9 posted 09-03-2014 02:00 PM

a real beauty larry, im going to make me a new one, which will be end grain Walnut…this board of yours bespeaks elegance….

-- GRIZZMAN ...[''''']

View lew's profile

lew

11759 posts in 3539 days


#10 posted 09-03-2014 02:12 PM

A masterpiece from The Master!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View woodsmithshop's profile

woodsmithshop

1278 posts in 3330 days


#11 posted 09-03-2014 02:17 PM

I like it, very nice looking board Larry.

-- Smitty!!!

View Jim Jakosh's profile

Jim Jakosh

19316 posts in 2890 days


#12 posted 09-03-2014 03:24 PM

Sweet board, Larry!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View hoss12992's profile

hoss12992

3900 posts in 1677 days


#13 posted 09-03-2014 05:08 PM

Beautiful! Great job

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View JL7's profile

JL7

8587 posts in 2749 days


#14 posted 09-03-2014 09:44 PM

Really classy, nice work Larry….

-- Jeff .... Minnesota, USA

View Dusty56's profile

Dusty56

11814 posts in 3472 days


#15 posted 09-03-2014 11:55 PM

Very nice, Larry : )

-- I'm absolutely positive that I couldn't be more uncertain!

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com