LumberJocks

Tablesaw Supersled

  • Advertise with us
Project by Paul D posted 09-02-2014 01:41 AM 2819 views 17 times favorited 7 comments Add to Favorites Watch
Tablesaw Supersled
Tablesaw Supersled No picture No picture No picture No picture No picture
Zoom Pictures

Here is my Super Sled based on the one from Eagle Lake Woodworking. I did the 5 cut and have it dialed in to about a half a thousandth. I built a picture frame as a test and the miters are nearly perfect. A great addition to my shop. Made of birch ply and oak and a little bit of hardboard for the shop made miter T track.

-- Paul D - Lawrenceville, Georgia





7 comments so far

View bushmaster's profile

bushmaster

1369 posts in 1748 days


#1 posted 09-02-2014 03:56 AM

Super fantastic, especially the 1/10000

-- Brian - Hazelton, British Columbia

View Underdog's profile

Underdog

904 posts in 1501 days


#2 posted 09-02-2014 01:21 PM

Looks great! Thanks for the reference to Eagle Lake Woodworking too. Might have to make one of these…..

-- "woodworker with an asterisk"

View helluvawreck's profile

helluvawreck

23189 posts in 2332 days


#3 posted 09-02-2014 01:34 PM

It looks like a great sled and will be a wonderful addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View bdresch's profile

bdresch

121 posts in 1074 days


#4 posted 09-02-2014 05:39 PM

A good sled is my next project. What did you use for the miter bars? I was thinking of doing that design but add a later of 1/4 hardboard so I could use it for bevel and dado cuts using replaceable inserts on the base and fence.

View Paul D's profile

Paul D

2130 posts in 3214 days


#5 posted 09-02-2014 09:35 PM



What did you use for the miter bars?

bdresch, I used UHMW runner strips that I bought at Peachtree Woodworking. I had a little issue with it being too tight after screwing it in so I drilled the threads out a little and now it runs nicely on the table.

-- Paul D - Lawrenceville, Georgia

View English's profile

English

517 posts in 943 days


#6 posted 09-02-2014 10:15 PM

Great looking sled!! I have one this size, only problem is it’s heavy.

-- John, Suffolk Virgina

View Fishinbo's profile

Fishinbo

11362 posts in 1641 days


#7 posted 09-04-2014 08:53 PM

Great job on that. That’s very useful.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com