or Join Now!
I posted my first deck cooler cabinet in the Spring, but have sold 10 since. I have tried to separate mine from others with carving. Names, and Logos seem to be the most requested so far.
-- David, Norwood Mass, firstname.lastname@example.org
home | projects | blog
216 posts in 1335 days
Preview this project card
#1 posted 09-02-2014 12:24 AM
Should have mentioned I added this new size, 70 qt… holds a lot.
180 posts in 1077 days
#2 posted 09-02-2014 06:49 PM
Sweet! what type of lumber did you use?
-- Remember, Jesus was a carpenter.
88 posts in 1275 days
#3 posted 09-02-2014 11:34 PM
Very nice, Do you have plans or a website with directions? I’d like to make some for gifts.
-- "There are three kinds of men. The ones who learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves." --- Will Rogers
#4 posted 09-03-2014 05:04 AM
I was in Home D a few months back and they had 1×5 pine boards 4’ long for 1.82 each, I bought 120 of them. Prior to that I shop around Lumb Liquidators for deals.. Try to keep knots to a min…As for plans.. No.. but I make three sections of the center parts, basically 1×5 pine boxes, and then add the legs. I biscuit join 1×3s for a deck on top of this, and then biscuit join a frame for the lid and add the top.. A few trim pieces and I plumb the drain with copper and two 1/2 copper to 3/4 thread connectors and a screw in faucet. Pull all screws out of cooler, handles, hinges, limit strap and drain parts.. save the stainless screws and the plastic gasket and 3/5 thread nut to put back on.
33 posts in 956 days
#5 posted 09-04-2014 05:20 PM
How much do you normally ask for them?
-- Sheri, Alabama
445 posts in 1785 days
#6 posted 09-04-2014 07:26 PM
I’ve made two coolers like this and I struggle every time with what to do for the cooler drain. If I could figure out the process, I’d start making 3-4 at a time and selling them too.
-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics