|Project by missingdigitworkshop||posted 08-28-2014 04:00 AM||1258 views||6 times favorited||3 comments|
Made from the scrap pile.
Sides and bottom are 1/2 ply. (Table project)
Tool holder from 1x material. (Bookcase project)
Handle is from a 2×4. (Workbench project)
Rope. (Just in the shop)
Rope handle brackets are from salvaged oak flooring. (Neighbor’s trash. Now they ask before they put wood in the trash.)
Tray and tray runners are resawn 1x material. (Shadowbox project)
Tray bottom 1/4 ply. (Shadowbox project)
Graphics were printed on laser printer and put on with laquer thinner. (Unlimited possibilities)
Finished with 2 coats of spray poly.
-- Do not be discouraged by those who don't. Be inspired by those who do.