or Join Now!
Bloodwood and Ironwood sole, Hock blade
-- PW Norris
home | projects | blog
10 posts in 1045 days
Preview this project card
1810 posts in 2967 days
#1 posted 08-24-2014 01:00 PM
-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.
1064 posts in 1312 days
#2 posted 08-25-2014 05:59 AM
Pretty plane, but I was told when I built my first one the shavings should be less than 1/2 a thou. and look like lace! Be able to read newspaper through it! LOL!
-- Lifting one end of the plank.
488 posts in 1080 days
#3 posted 08-25-2014 10:25 AM
Love Krenov, love your plane.Great job, do you have plans ?Cheers, Jinky (James).
#4 posted 08-25-2014 11:52 AM
rad257 – I was thrilled to get a shaving of any thickness out of it….. Need to learn to adjust it tighter.
jinkyjock – Fine Woodworking Issue #1
#5 posted 08-25-2014 04:55 PM
Very light taps! the wedge for up and the iron for down! Firm strike on body behind iron to disengage iron and wedge! Really quite easy after a few years practice! As I have said before someplace! On a smoother sometimes you will only take of slivers on the final strokes but wood will be like glass! Practice on Poplar, Good luck!
jinkyjock – I think Lee Valley has some plans that work not bad. Check in there plane blade section I think.
#6 posted 08-25-2014 11:26 PM
Thank you rad457.
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics