|Project by Nate L.||posted 08-18-2014 06:37 AM||1262 views||0 times favorited||3 comments|
This is as finished as it is going to be with coins available to show it. All I have left is to stain and seal it. The guy I made it for sent me picture of something similar and asked if I could replicate it. As always, it could be better, but I learned a lot and I think I could turn a few of these out in a weekend now. For the shelves/racks, all I did was cut them to length and then glued them in. If anyone has any better ideas or techniques for the racks please let me know. It is probably hard to see in the picture but there are also dados cut for three panes of glass. I wanted to cut a dado on the base for the glass to set into but I was a little router shy. Maybe next time.
-- Nate, Las Vegas, http://nateswoodshop.com