LumberJocks

Chestnut Winged Bowl #83

  • Advertise with us
Project by Jim Jakosh posted 08-17-2014 01:38 AM 893 views 0 times favorited 18 comments Add to Favorites Watch

This was made from the scraps of the crotch bowl #82. It was cut parallel to the trunk and had bark on both sides but it would not stay on after it dried. The ends were square cut but I sanding a radius on to soften them. It is 7” long, 4 1/2” on the wide end and 2 1/2” high.
It is finished with the 3 stage buff of Tripoli White Diamond and Carnuba wax.

.............Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!





18 comments so far

View Rustic's profile

Rustic

3142 posts in 2283 days


#1 posted 08-17-2014 01:40 AM

love it

-- www.carvingandturningsbyrick.com, Rick Kruse, Grand Rapids, MI

View grizzman's profile

grizzman

7095 posts in 1990 days


#2 posted 08-17-2014 02:33 AM

that sure is a unique piece of wood, and would be perfect for fruit…very nice, you have been having some fun on the lathe huh….always enjoy seeing the unique pieces you do.

-- GRIZZMAN ...[''''']

View MarkTheFiddler's profile

MarkTheFiddler

1807 posts in 875 days


#3 posted 08-17-2014 03:21 AM

Beautiful bowl Jim. You found the bowl hiding in the wood. Amazing job as usual my friend.

-- Thanks for all the lessons!

View Cliff 's profile

Cliff

291 posts in 410 days


#4 posted 08-17-2014 03:50 AM

Looks good Jim. Nice shape and the grain swirls around beautifully. It is amazing that when looking at photo 3 it is a different shape. Looking at it from the face we see the nice long curved shape and know then it will sit really steady on its base as depicted in photo 3. Great project!!!! ( I think it could also hold ice cream)

Regards,

Cliff.

-- Cliff Australia : Snoring is good. It blows away all the Sawdust.

View Joe Lyddon's profile

Joe Lyddon

7799 posts in 2739 days


#5 posted 08-17-2014 04:45 AM

Another beautiful bowl!

... a bowl that can Hold something! ... like nuts, etc. COOL LOL :)

Thank you!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View stefang's profile

stefang

13270 posts in 2021 days


#6 posted 08-17-2014 12:12 PM

Great shape and wood.

-- Mike, an American living in Norway.

View Jim Jakosh's profile

Jim Jakosh

11728 posts in 1792 days


#7 posted 08-17-2014 12:15 PM

Thank you all for the nice comments. I just can’t throw a pretty piece of wood in the scrap barrel!!

Hi Cliff, I’m surprised Roger did not suggest the ice cream yet??

Hi Joe. You make a good point- holding nuts, maybe chestnuts!! I’ll give this one to Al’s brother Carl who is also at the orchard. They will both have a bowl out of the same crotch of their chestnut tree!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Xyloid_Curt's profile

Xyloid_Curt

108 posts in 773 days


#8 posted 08-17-2014 02:41 PM

Great form and finish. I have been thinking along these lines for a rectangular block of walnut sitting on my floor for months. You inspire me to mount it and see what I can do.

-- Xyloid Curt www.etsy.com/shop/xyloidcreations

View Jim Jakosh's profile

Jim Jakosh

11728 posts in 1792 days


#9 posted 08-17-2014 02:55 PM

Thanks Curt !! When you turn the rectangular block, stop the lathe to sand it!! They are fun to turn but deceiving when they are spinning because they look round!

............Cheers,, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View DynoSores's profile

DynoSores

2 posts in 65 days


#10 posted 08-17-2014 05:36 PM

Wow great job

View NormG's profile

NormG

4259 posts in 1690 days


#11 posted 08-17-2014 06:01 PM

Nicely done

-- Norman

View peteg's profile

peteg

2927 posts in 1510 days


#12 posted 08-17-2014 09:32 PM

You’re a machine Mate :)
This looks great, would make a nice little bowl for those nibbles we get out when you sit back with a cold one & watch “match of the day”
cheers
Pete

-- Pete G: If you always do what you always did you'll always get what you always got

View Bob Collins's profile

Bob Collins

1566 posts in 2370 days


#13 posted 08-18-2014 02:34 AM

Very nice Jim, great looking piece of wood, you sure have been busy lately.

-- Bob C, Australia. I love sharing as long as it is not my tools

View Blackie_'s profile

Blackie_

3509 posts in 1199 days


#14 posted 08-18-2014 04:05 PM

Nice one Jim

-- Randy - If I'm not on LJ's then I'm making Saw Dust. Please feel free to visit my store location at http://www.facebook.com/randy.blackstock.custom.wood.designs

View HillbillyShooter's profile

HillbillyShooter

4761 posts in 979 days


#15 posted 08-18-2014 06:18 PM

Beautiful piece—very artistic and eye catching. Contrats on DT3.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase