LumberJocks

black walnut business card case

  • Advertise with us
Project by Homunculus posted 08-13-2014 04:48 PM 1222 views 2 times favorited 3 comments Add to Favorites Watch

Made this business card case out of air dried black walnut that I bought last year from a guy with a bandsaw mill. Resawed a 1/8” veneer using stacked featherboards and my tablesaw. No bandsaw yet. Used sacrificial carrier boards to cut small components and sanded using my belt sander bench jig. Finished with ‘natural’ colored danish oil.





3 comments so far

View timbertailor's profile

timbertailor

1591 posts in 885 days


#1 posted 08-13-2014 06:45 PM

Nice idea for a project.

I like it.

-- Brad, Texas, https://www.youtube.com/user/tonkatoytruck/feed

View Matt's profile

Matt

182 posts in 879 days


#2 posted 08-14-2014 12:40 AM

I like that! Did you glue wood to the sacrificial substrate to make thos small cuts?

-- I do this for fun.

View Homunculus's profile

Homunculus

20 posts in 843 days


#3 posted 08-14-2014 09:59 PM

Thanks for the compliments! Yes Matt I used 1/4” scrap plywood to make cuts on those tiny pieces. Partly to save my fingers and partly because the wind from the saw pulls the cutoff into the saw where it explodes violently under the guard (not that I experienced that or anything…). I used hot glue and just popped it right off after. I think two sided tape would be less messy.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com