Another Paint Brush Box

  • Advertise with us
Project by robscastle posted 08-13-2014 08:47 AM 1208 views 0 times favorited 7 comments Add to Favorites Watch

Made under similar circumstances to Rogers post.


Simple butt joints
External hinges at the back
A small clasp lock on the front
Vanessa engraved with the Milescraft lettering set
Filled with Red Flocking
Overall finish is Polyurethane.

Just in case the 6 picture police catch me I only have the three photos!!

-- Regards Robert

7 comments so far

View Roger's profile


20898 posts in 2678 days

#1 posted 08-13-2014 11:02 AM

Nicely done Rob. I like the flocking in the letters. Way cool.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View stefang's profile


15713 posts in 3208 days

#2 posted 08-13-2014 12:22 PM

Good one Robert!

-- Mike, an American living in Norway.

View Mr M's Woodshop's profile

Mr M's Woodshop

420 posts in 2941 days

#3 posted 08-13-2014 05:00 PM

And I’ll bet Vanessa smiled, too. Good job!

-- Henry Mowry, Santa Clarita, CA,

View helluvawreck's profile


29743 posts in 2740 days

#4 posted 08-13-2014 05:01 PM

This is a nice practical box.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Joe Lyddon's profile

Joe Lyddon

9979 posts in 3926 days

#5 posted 08-13-2014 05:18 PM

Another COOL brush box…

... but butt… ? :) LOL


-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View robscastle's profile


4723 posts in 2078 days

#6 posted 08-13-2014 10:37 PM

Thanks everyone for the comments,

I checked out the production of this paint brush box

I made it in November 2009 for my daughter in law
She is very artistic but being a young mother limited in resources at the time.

Yes she did smile !!

It has got to be one of my earlest wood working projects I had done as in 2009 I was still employed then!

I also made my son a pen holder from the offcuts, its still sitting in his office today!

The image is created by tapered layered sanding

I will have to see if I can find the first ever project I did and post it challenging LJs to post also
Looking back in hindsight what a clanger it is going to be, but at the time no doubt a treasure inspiring more work and developing skills.

-- Regards Robert

View David Dean's profile

David Dean

608 posts in 2773 days

#7 posted 08-14-2014 10:09 AM

nice work.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics