LumberJocks

Cutting board

  • Advertise with us
Project by KCConst posted 08-10-2014 11:38 PM 1429 views 6 times favorited 11 comments Add to Favorites Watch

Daughter came home for a visit and asked if we could make a cutting board. I said sure but let’s try something challenging. It’s all done except for the mineral oil. Now with oil it really darkened and brought out the color. She’s happy so I’m happy but I bet I’ll have to convince her to use it. I offered to put a picture hanger on the back as a joke.

-- "Don't let what you cannot do interfere with what you can do" Wooden





11 comments so far

View SPalm's profile

SPalm

4935 posts in 2630 days


#1 posted 08-10-2014 11:56 PM

Very nice work.
That is a tough design to get it as tight as you did.
Good job.

Steve

-- -- I'm no rocket surgeon

View Mr M's Woodshop's profile

Mr M's Woodshop

302 posts in 1815 days


#2 posted 08-11-2014 12:09 AM

Wow. Great craftsmanship!

-- Henry Mowry, Santa Clarita, CA, http://www.MowryJournal.com

View Bob Casey's profile

Bob Casey

56 posts in 229 days


#3 posted 08-11-2014 12:13 AM

what a nice piece would love to try that one one day great job

-- woodnutbob

View triviasteve's profile (online now)

triviasteve

116 posts in 448 days


#4 posted 08-11-2014 01:36 AM

great job. what woods did you use?

-- You know I'm on the level 'cause my bubble's in the middle.

View hotncold's profile

hotncold

588 posts in 292 days


#5 posted 08-11-2014 04:05 AM

Very nice! I want to do this design (wish me luck)!!

-- Dennie - Tennessee - Every Pro was once an Amateur. Every Expert was once a Beginner. So dream Big and start Now!

View deon's profile

deon

2240 posts in 1773 days


#6 posted 08-11-2014 05:47 AM

Looks great!

-- Dreaming patterns

View prospector45's profile

prospector45

135 posts in 478 days


#7 posted 08-11-2014 11:40 AM

That design requires a lot if skill and patience. You clearly have both. Great project.

-- Skilled craftsman are not cheap, cheap craftsman are not skilled. Bert, Wooster

View bobasaurus's profile

bobasaurus

1447 posts in 1932 days


#8 posted 08-11-2014 04:43 PM

That is fantastic. Wish I had the patience to try one of these.

-- Allen, Colorado

View Grumpymike's profile

Grumpymike

1180 posts in 1063 days


#9 posted 08-11-2014 05:37 PM

Now that is down right beeeautiful!
Three wood colors? What did you use?
Is 30 degrees the magic number??

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View KCConst's profile

KCConst

49 posts in 646 days


#10 posted 08-11-2014 06:52 PM

Used Walnut, Red Oak and Poplar. Toughest part was gluing up. Just plain hard to get trapezoids to not squeeze this way or that way. Then once you get them into a triangle you go bonkers looking at two different types to make sure they’re facing the right way. Grumpy Mike yes 30 (or 60) degrees is the magic angle. With a ratio of 2:1 from bottom to sides or top of the trapezoid. Looks like SPALM has it all on his post. http://lumberjocks.com/SPalm/blog/17488 for reference.

-- "Don't let what you cannot do interfere with what you can do" Wooden

View lumberdustjohn's profile

lumberdustjohn

1259 posts in 1914 days


#11 posted 09-03-2014 04:34 PM

Nice job. Looks great

-- Safety first because someone needs you.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase