LumberJocks

Multi-Purpose Table Saw Station

  • Advertise with us
Project by descolada posted 07-13-2014 10:37 PM 2438 views 4 times favorited 6 comments Add to Favorites Watch

I always like trying to make the most of limited space and keep my shop layout at open as possible. This project definitely meets the goals as well as making my table saw much easier to use. I drew upon ideas I got from looking at all of your shop projects and added a few of my own to the mix. I hope this helps out someone else like the previous projects helped me.

Features of this table saw station:
1. 24” wide outfeed table Allows ~70” rip without additional support Perfectly flat top with 2” overhang for easy assembly (torsion box topped with 1” mdf)
2. Sliding cabinets that pull out from the table to add another 20” of table space
3. Cabinet tops flip up to give access to mortise and tbd tool
4. 20” raised platform to extend outfeed support to >8’
5. Mini cabinet for table saw accessories and easy access to featherboards, rollers, and a storage slot for the rip fence

I wish I built this a long time ago. Only problem is that I now have an unused, easy access, storage space for another bench-top tool. Hmm….





6 comments so far

View timbertailor's profile

timbertailor

1592 posts in 888 days


#1 posted 07-14-2014 01:10 AM

I wish I had the space for an out feed table like yours. Must make cutting up large plywood sheets much easier.

-- Brad, Texas, https://www.youtube.com/user/tonkatoytruck/feed

View ChrisK's profile

ChrisK

1809 posts in 2545 days


#2 posted 07-14-2014 11:23 AM

Nice job, nothing like space for a new tool or two.

-- Chris K

View TNwoodchuck's profile

TNwoodchuck

102 posts in 3239 days


#3 posted 07-14-2014 08:26 PM

Nicely done and excellent use of space. I recently gotten serious about opening up shop space too, and it is a much nicer place to work and hang out.

-- Chuck near Nashville - “All you are unable to give possesses you” (Andre Gide)

View Roger's profile

Roger

19868 posts in 2268 days


#4 posted 07-15-2014 11:59 PM

Super nice setup. Storage and tabletops to boot.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View SCOTSMAN's profile

SCOTSMAN

5839 posts in 3049 days


#5 posted 10-26-2014 03:59 PM

Is that a giant router on the end in black or what it looks heavy duty? Alistair

-- excuse my typing as I have a form of parkinsons disease

View descolada's profile

descolada

52 posts in 1262 days


#6 posted 10-29-2014 02:45 PM

There is a router table back there, but it’s just a standard portercable 15amp router. The big black thing that might look like a router is just a junction in my dust collection system.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com