LumberJocks

Cheap Fret Markers

  • Advertise with us
Project by JbWo posted 07-13-2014 04:25 PM 1431 views 2 times favorited 2 comments Add to Favorites Watch
Cheap Fret Markers
Cheap Fret Markers No picture No picture No picture No picture No picture
Zoom Pictures

Installation Procedure:
1. Tape fret board
2. Mark location
3. Punch center
4. Drill 7/32” hole a hair deeper than 1/2 the diameter of the airsoft bb
5. Remove tape
6. Insert 6mm airsoft BB and pound in with rubber mallet
7. Sand flush and polish with really fine emery board
8. Have tried blue and translucent red, but solid white looked the best

Note: this has been added to the Cigar Box Fretting Tools Project: http://lumberjocks.com/projects/103323

-- Jb Wo





2 comments so far

View NormG's profile

NormG

5510 posts in 2471 days


#1 posted 07-13-2014 07:45 PM

Now, that is thinking outside of the box, what a great idea and not expensive at all

-- Norman - I never never make a mistake, I just change the design.

View Roger's profile

Roger

19886 posts in 2271 days


#2 posted 07-16-2014 12:01 AM

Super idea.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com