|Project by jma213||posted 07-10-2014 07:17 PM||1290 views||4 times favorited||5 comments|
After a number of years of frustration with my Pottery Barn Eucalyptus Patio table constantly peeling and needing finished each year (sometimes twice), I decided to get ride of it and build my own. My goal was to build something that matched the style of our home, bringing the indoors out. I built this table to match the dining room table within the house – instead of a cherry top I used Cedar. I had major difficulties finding turned legs from pressure treated lumber so I purchased porch posts and cut them down. Legs and support are painted black, the Cedar top is treated with Oil. I used the IPE OIL I had left over after treating my IPE deck. My goal was to create a table with as little maintanance as possible, so I’m hoping that the IPE OIL finish holds up. I will keep the group posted. If not, I’ll most likely cover with Epithanes after a good sanding.