LumberJocks

Cd Holders

  • Advertise with us
Project by OldWolfsWoodShop posted 07-08-2014 09:52 PM 773 views 0 times favorited 2 comments Add to Favorites Watch

To go along with the furniture for my client, I had to create CD holders. The Client is an avid CD/DVD collector. The units are 5 3/4” x 5 1/2” x 8”. I created a stave cylinder, with kraft paper glued in to allow for easy separation. Turned the cylinders round and split each cylinder, so I would have 2 half moons. Rather than trying to turn the inside, I opted to cut the cylinder on the band saw to fit the CD. 2 Maple ends and you have a rack. Finished with 5 coats of Minwax Gel Stain and 2 coats of Wipe on Poly.
Each unit will hold approximately 125 CDs.

-- Making Sawdust is great stress relief... www.oldwolfswoodshop.ca





2 comments so far

View Knothead62's profile

Knothead62

2581 posts in 2426 days


#1 posted 07-08-2014 11:12 PM

I would think they would get scratched easily. I looked to see if they were square to hold the case. That is some nice work and good looking wood!

View OldWolfsWoodShop's profile

OldWolfsWoodShop

175 posts in 1412 days


#2 posted 07-09-2014 12:36 AM

I would have agreed with your comment, but The client currently stores his CDs out of the case. A case that you build what the customer wants.

Thanks for your comments,

-- Making Sawdust is great stress relief... www.oldwolfswoodshop.ca

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com