Walnut Serving Tray

  • Advertise with us
Project by Notw posted 06-23-2014 01:13 PM 1042 views 1 time favorited 5 comments Add to Favorites Watch

Basic serving tray made from resawn 3/4” walnut with mitered corners and finished with 2 coats of brushed on polyurethane. Did the resawing prior to having my planer so getting all the boards to the same thickness after sanding was a challenge, all said and done i’m happy with how it came out.

5 comments so far

View Mr M's Woodshop's profile

Mr M's Woodshop

329 posts in 2104 days

#1 posted 06-23-2014 03:46 PM


-- Henry Mowry, Santa Clarita, CA,

View whitebeast88's profile


3947 posts in 1227 days

#2 posted 06-23-2014 09:21 PM

very nice job!!

-- Marty.Athens,AL

View robscastle's profile


2530 posts in 1240 days

#3 posted 06-24-2014 06:46 AM

Sawing walnut to a uniform thickness is no easy task, let alone then sand walnut, thats one hard act to follow.
Brilliant result with the finish. it certainly brings out the timber features’

Nice work.

-- Regards Robert

View Notw's profile


276 posts in 790 days

#4 posted 06-24-2014 12:19 PM

Thank you for all the compliments

View Duckster's profile


298 posts in 387 days

#5 posted 09-17-2014 02:21 PM

Very nice. I like the way you have the extension work area on your table saw!

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics