LumberJocks

Side clamp - top clamp honing guide + Angle guide

  • Advertise with us
Project by RyRat posted 06-12-2014 08:41 PM 1058 views 2 times favorited 1 comment Add to Favorites Watch

I was having trouble clamping my low angle smoother blade in the side clamp guide. So instead of shelling out for the Veritas MKII, I cut down some scrap brass. The clamps are made of 3”x1” brass strips. one side it taped 1/4-20 with 1/2” long screws to clamp the plane blade. Pretty simple and it works great!

Angle guide is made of mahogany. It’s from a design I saw on LJ a while back. Reversible 1/8” blade stop with an extra 1/8” on one side to set for micro bevel.

-- If you are flammable and have legs, you are never blocking a fire exit. -Mitch Hedberg





1 comment so far

View Jim Jakosh's profile

Jim Jakosh

11786 posts in 1802 days


#1 posted 06-14-2014 12:49 AM

Very nice job!! You’ll use it a lot and you have all the angles you need!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase