Spline jig

  • Advertise with us
Project by geekwoodworker posted 06-04-2014 09:04 PM 1770 views 8 times favorited 5 comments Add to Favorites Watch

Needed a spine jig so I made one that runs along table saw fence but it seemed dangerous to me. So I did some research and found one online and built it. So here it is and it works great.

It runs in the mitre slots on the table saw. Has T-slots where the positive stops run. Push handle to keep hands away from where blade runs. Made with scrap plywood. Mitre is made of russian birch ply and is glued into a dado slot cut on the router.

Works great and is safe.

-- Sean G, Barrie, Ontario

5 comments so far

View Gassit's profile


35 posts in 1025 days

#1 posted 06-05-2014 02:30 AM

Hi Sean,

Any chance you could provide a link to the one online?


View geekwoodworker's profile


238 posts in 248 days

#2 posted 06-05-2014 10:22 AM

I can’t remember exactly what link I used but here are a couple I used for inspiration.

Also if you google spline jig and then click on images you will get thousands of sites. I use this method along with LJ’s.

thanks for looking

-- Sean G, Barrie, Ontario

View hoss12992's profile


3020 posts in 680 days

#3 posted 06-05-2014 06:57 PM

Great job and welcome to LJ’s

-- The Old Rednek Workshop

View ChipByrd's profile


92 posts in 715 days

#4 posted 06-05-2014 08:21 PM

That’s awesome. I have been planning to build a similar jig and seeing yours really helps. Thanks!

View dnick's profile


962 posts in 1170 days

#5 posted 06-07-2014 03:00 AM

A great jig. Well done.

-- dnick, North Hollywood, Ca.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase