|Project by ja6ke||posted 06-04-2014 12:39 PM||1010 views||2 times favorited||11 comments|
A walnut slab with some yellow heart wedges then turned. The biggest issue was the not knowing the outside shape till I got the inside set. I don’t have the ability to turn it a second time once it is on the chuck so I had to finish the outside carefully without running into the chuck.
Uploaded some more photos of the early stages. I had run into a problem trying to get a wedge of less of 90 deg because the kerf of the ts blade wouldn’t allow a sharp point to the cut out. I had lots of great suggestions that I may try but in this case just tilted the blade all the way over to 45 deg and cut away.