LumberJocks

Corner cabinet

  • Advertise with us
Project by Doug posted 06-03-2014 12:56 AM 986 views 1 time favorited 4 comments Add to Favorites Watch

This corner cabinet was built of maple and maple plywood I had a tough time with the arch panel door. Not so much with the panel but the top rail as the first one split out as I was routing the inside groove. I learned to watch the grain direction more carefully I was very pleased with the finish I used. Usually staining maple is blot hey, but this time I tried out Old Masters wiping stain. This really beat the pants off minwax. After. The stain dried I applied a walnut gel stain as a glaze over the moldings and routed parts. Again this was a pleasure to see as it made the maple pop with shadows and shape. Two light coats of shellac as a sealer coat followed by some :320 light sanding and a finish of spray polyurethane…..I was surprised by the finish with little finish the finish to do, i was happy with the final results. Now onto the next project. Oh the size is 19 inches on the corner sides and the height is 37 inches.this worked out to be a nice design and fun filled project for me,so onto the next one!

-- Doug, Long Island, Winterwood





4 comments so far

View Oldtool's profile

Oldtool

2374 posts in 1655 days


#1 posted 06-03-2014 01:31 AM

Super nice cabinet, great job on this. The dark glaze added a very nice antique effect, really nice work.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View MT_Stringer's profile

MT_Stringer

2853 posts in 2695 days


#2 posted 06-03-2014 03:17 AM

That looks really nice. Jealous, I am.
Later this year, I will have two of those to build for our kitchen.

-- Handcrafted by Mike Henderson - Channelview, Texas

View Rick's profile

Rick

8287 posts in 2497 days


#3 posted 06-03-2014 06:25 AM

Very Nice Work Indeed Doug. Thanks For Sharing.

Rick

-- Hope Everyone Is Doing Well! .... Best Regards: Rick

View Ken90712's profile

Ken90712

16955 posts in 2653 days


#4 posted 06-03-2014 09:17 AM

Great job, very clean… I have to ask about the pay phone is this at home or at a shop? That would be a great conversation piece for my man cave….

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com