|Project by Rockbuster||posted 06-01-2014 02:09 PM||2046 views||8 times favorited||23 comments|
Here is my last cutting board, at least for awhile, I love building these things, This one is a little more complex than some of the others i have built. There is about 300 individual pieces in this one, and many hours gluing and putting it together. First two pictures are of the the board itself, with the third picture showing the board flipped, and showing the bottom with the rubber bumpers. The two alternating pieces along with the bumpers, keep the board elevated, and somewhat more adaptive to uneven surfaces, and scratching counter tops The 4th pic. just shows the board along with a previous bowl that i made (Kathy’s Bowl). http://lumberjocks.com/projects/85291
Pictures 5&6 are a close up view of the zig zag ribbon effect. This is simply done by taking the Southwest Indian Blanket design, (Malcolm Tibbetts) and stretching it a bit. Woods used, Walnut, Cherry,Hard Maple, Curly Maple, Tulipwood,Yellowheart, Bloodwood, Wenge, and African Blackwood. Size 12” X 16” Finish is 3 coats of Butcher Block Oil&Finish sanded between coats with #600 sandpaper .
This board, along with a diagonal laminated 6 different woods rolling pin will be a wedding gift for my Nieces daughter.
C and C Welcome.
-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.