|Project by diggerdelaney||posted 05-29-2014 07:53 PM||682 views||0 times favorited||6 comments|
Not posted here for a while but thought I would post this little box.
This box is from Sapele, Ash and Beech and measures 8 1/4” to the top of the finial and is 3 1/4” across.
Turned the main box from ash using my crown revolution tool to hollow. The base and lid are Sapele these where turned with my bowl gouge and finally the finial from beech was rough turned with the roughing gouge and shaped entirely with the 1/2” skew from then on.
All parts were sanded to 600 grit and sander sealer applied then buffed on the chestnut buffing system The brass rods where buffed using a metal buffing system similar to the chest nut one and finally dipped in a sealer and then waxed after fitting hopefully this will help prevent tarnishing.
The lid has a slight lip to help lift it from the main box.
-- Derek, Kent, UK, http://s702.photobucket.com/albums/ww21/diggerdelaney/